LCD 3.2 Inches ILI9341 TFT for Arduino (UNO & MEGA)

$ 11.84


TFT3.2 is a TFT LCD Screen Module , 40pins interface , not just a LCD break but include the Touch , SD card and Flash design. So it’s a powerful extension module for your project.
The Screen include a controller SSD1289-spec.pdf, it’s a support 16bit data interface , easy to drive by many MCU like STM32, AVR and 8051 etc.

TFT01 is designed with a touch controller in it . The touch IC is ADS7843 , and touch interface is included in the 40 pins breakout.

Another useful extension in the TFT01 is the SD Card socket . It use the SPI mode to operate the SD card, the SPI interface include in the 40pins breakout.

There is a reserve extension design in the TFT01 , that’s the external flash . It’s leave the pad and the pins out for the SST25VF016B Flash. So when you need , you can easily add a external flash for your project .

The TFT01 layout a 40 pins interface for your project , the interface include LCD bus, SD card bus, Touch screen bus and the Flash bus.


*Extensive bus interface

*Single chip solution for a liquid crystal QVGA TFT LCD display

*240RGBx320-dot resolution capable with real 262,144 display color

*Support MVA (Multi-domain Vertical Alignment) wide view display

*Internal oscillator and hardware reset

*Partial drive function, enabling partially driving an LCD panel at positions specified by user

*Power saving functions
*8-color mode
*standby mode
*sleep mode

*Low -power consumption architecture
*Size:940mm * 630mm

Application Ideas
*Digital Photo Frame (DPF)
*Video terminals
*Game consoles
*Video phones and Portable VCD, DVD

The I/O of the Panel is 3.3v voltage , so you had better not to directly connect it to the 5v voltage I/O .We suggest using the 30K and 20K resistor to reduce voltage.